max30102

An open-source handmade smartwatch. All of the codes, PCBs and schematics are available. ⌚

ATTiny85 Pulse Oximeter with Photoplethysmogram (PPG) display

MAX30102 full-featured driver library for general-purpose MCU and Linux.

A Maxim MAX30102 driver ported to MicroPython. It should also work for MAX30105.

STM32 HAL driver for MAX30102 pulse oximeter and heart rate sensor. Not for clinical use – proceed at your own risk.

This repository is unofficial porting of Arduino sample code of MAXRESDEF117#(max30102) HR/SpO2 sensor

Simple SpO2 plotter from scratch for Arduno IDE by reading MH-ET LIVE MAX30102 raw RED/IR data

MAX30102 Pulse Oximetry Sensor code for Raspberry Pi

This project is MAX3010x library for STM32F4

A MAX3010X Web oximeter based on ESP32 enables the Fat file system. Users are allowed to use FTP to manage the file system to upload the website. The website uses Bootstrap+ChartJS

Arduino Library for the ProtoCentral Pulse Express breakout board with MAX30102 and MAX32664D, used for measurement of Spo2, heartrate and BP trending.

ESP8266 SPO2 and Pulse meter using MAX30102 sensor

Displays SPO2 & heart-rate measurements from a MAX30102 sensor on an OLED display and logs the data in real-time to a Thingspeak channel

Developing firmware for a cheap Multimodal Cardiovascular Monitoring System for detecting PPG, PCG and ECG signal using MAX30102, INMP441 and AD8232 with STM32F401 ARM-Cortex MCU

Embedded heart-rate and SpO2 monitoring system on Arduino Nano with MAX30102, real-time on-device signal processing, validity-gated inference, and LCD telemetry.

STM32F446RE | MAX301102 sensor | ILI9341 LCD| Signal Processing | Driver Development

Synchronize 3 sensor MAX30102, INMP441, AD8232 for PPG, PCG and ECG signal using ESP-IDF

Library for heart-rate detection from raw analog signal

Ambulatory blood pressure monitor — ESP32-S3 + MAX30102 PPG + AD8232 ECG + BLE (NimBLE) — SLIIT Final Year Project 2022

Toy MAX30102 cardiac monitor