Add support for MPL3115A2?

[Jibun-no-Kage]

Describe the bug

Sorry if this no longer the place to request sensor support as I have done in the past? Attempted to add MPL3115(A2) support.

	/dts-v1/;
	/plugin/;

	/ {
	    compatible = "brcm,bcm2835";

	    fragment@0 {
	        target = <&i2c1>;
	        __overlay__ {
	            #address-cells = <1>;
	            #size-cells = <0>;
	            status = "okay";

	            mpl3115: mpl3115@60 {
	                compatible = "fsl,mpl3115";
	                reg = <0x60>;
	                status = "okay";
	            };
	        };
	    };
	};

Did the following...

apt update && sudo apt install -y device-tree-compiler

dtc -@ -I dts -O dtb -o mpl3115.dtbo mpl3115.dts

cp mpl3115.dtbo /boot/firmware/overlays/

nano /boot/firmware/config.txt

dtoverlay=mpl3115

reboot

But did not seem to work or even load... dmesg showed no information?

dmesg | grep mpl3115

### Steps to reproduce the behaviour

Should see the typical 'UU' at the device addresss not '60'

 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f

00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: 60 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

### Device (s)

Raspberry Pi 5

### System

cat /etc/rpi-issue
Raspberry Pi reference 2026-06-18
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, ca8aeed0ae300c2a89f55ce9617d5f96a27e99e5, stage2

 vcgencmd version
2026/05/26 16:01:25
Copyright (c) 2012 Broadcom
version 086b83e3 (release) (embedded)

uname -a
Linux berzerk 6.18.50+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.18.50-1+rpt1 (2026-09-11) aarch64 GNU/Linux



### Logs

_No response_

### Additional context

_No response_