build(deps): bump the github-actions group with 2 updates

[dependabot]

Bumps the github-actions group with 2 updates: CodSpeedHQ/action and github/codeql-action/upload-sarif.

Updates CodSpeedHQ/action from 4.19.1 to 5.0.2

Release notes

Sourced from CodSpeedHQ/action's releases.

v5.0.2

What's Changed

• feat: add cycle-estimation and exclude-allocations inputs by @​not-matthias in CodSpeedHQ/action#229

Full Changelog: CodSpeedHQ/action@v5.0.1...v5.0.2

v5.0.1

🚀 Highlights

More precise measurements by default

cycle-estimation is now enabled by default, giving more precise benchmark cycle estimation in Simulation mode. See docs.

New: allocation exclusion

Opt in to exclude-allocations to remove allocator time from benchmarks in Simulation mode and reduce variance. See docs.

samply-based profiler by default on Linux

The walltime profiler now uses samply on all OSes. Set CODSPEED_WALLTIME_PROFILER=perf to restore the previous behavior.

⚠️ Breaking changes

• cycle-estimation is now enabled by default (see above)
• The samply-based profiler is now the default on Linux; set CODSPEED_WALLTIME_PROFILER=perf to revert

Details

🚀 Features

• Load eBPF through a delegated BPF token by @​GuillaumeLagrange
• Enable cycle estimation and allocation exclusion by default by @​not-matthias in #461
• Make samply profiler default for all OSes (#472) by @​GuillaumeLagrange in #475

🐛 Bug Fixes

• Classify mapped libraries without init-userns privilege by @​GuillaumeLagrange
• Disable allocator exclusion by default (#489) by @​not-matthias in #489

💼 Other

• Bump the memtrack pin to 1.4.0 by @​adriencaccia in #484

🏗️ Refactor

• Hook-based CPU isolation for the walltime runner by @​GuillaumeLagrange

🧪 Testing

• Run every tracking test under both BPF variants by @​GuillaumeLagrange

⚙️ Internals

• chore: bump runner version to 5.0.1 by @​github-actions[bot] in CodSpeedHQ/action#228
• docs: bump documented action version to v5 by @​adriencaccia in CodSpeedHQ/action#227
• Bump submodule to reduce debug info server timeouts by @​GuillaumeLagrange
• Make tests run release builds of the binaries by @​GuillaumeLagrange in #456
• Update submodule to fix fmt and ignore ubuntu debuginfod serv by @​GuillaumeLagrange

... (truncated)

Commits

• 0ca9cbb Release v5.0.2 🚀
• 551137a ci: restrict GITHUB_TOKEN to contents: read
• fc63264 feat: add cycle-estimation and exclude-allocations inputs
• 8847237 Release v5.0.1 🚀
• 81795c3 fix: remove yanked 5.0.0 version hash
• eaace14 docs: bump documented action version to v5
• a3e4fe0 chore: bump runner version to 5.0.1
• f87ba88 Release v5.0.0 🚀
• 7ab72f2 chore: bump runner version to 5.0.0
• See full diff in compare view

Updates github/codeql-action/upload-sarif from 4.37.3 to 4.37.6

Release notes

Sourced from github/codeql-action/upload-sarif's releases.

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

Changelog

Sourced from github/codeql-action/upload-sarif's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

... (truncated)

Commits

• 5595cca Merge pull request #4071 from github/update-v4.37.6-6a9359a1b
• ec9c757 Add change note for PR 4070
• 45c8742 Update changelog for v4.37.6
• 6a9359a Merge pull request #4070 from github/mbg/remote-address/change-file-default
• 065cdc0 Change DEFAULT_CONFIG_FILE_NAME
• f99dd5a Merge pull request #4066 from github/dependabot/npm_and_yarn/js-yaml-5.2.2
• 1804b21 Merge pull request #4068 from github/mergeback/v4.37.5-to-main-d1ba80a1
• 3020a2f Rebuild
• 93c3a5a Update changelog and version after v4.37.5
• d1ba80a Merge pull request #4067 from github/update-v4.37.5-1cd4d01d5
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[codspeed-hq]

Hooray! CodSpeed harness just leveled up!

The base and head of this comparison were measured with different runner settings, so their benchmark values are not directly comparable.

What changed between base and head:

• CodSpeed runner v5 changed how benchmarks are measured (base 4.19.1 → head 5.0.1). View release notes
• Cycle estimation (off → on) changes how benchmark performance is calculated. Learn more about cycle estimation

Re-run the base with the same settings to get a valid performance comparison.

---

_{Comparing dependabot/github_actions/github-actions-83a07df249 (d8bc10d) with main (a26843e)}