it's allways Failed upload，but it has been uploaded successfully.

[sunnyguhz]

Describe the bug
when I upload,it's allways to tell me that "Failed uploading: uploading error: exit status 1".But it has been uploaded successfully.

To Reproduce
any code

Screenshots
Memory Programming ...
Opening and parsing file: eeprom_clear.ino.bin
File : eeprom_clear.ino.bin
Size : 9004 Bytes
Address : 0x08000000

Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 4]
Download in Progress:

File download complete
Time elapsed during download operation: 00:00:00.329

RUNNING Program ...
Address: : 0x8000000
Application is running
Start operation achieved successfully
Failed uploading: uploading error: exit status 1

Desktop (please complete the following information):

• OS: [Windows10 22H2]
• Arduino IDE version: [2.3.2]
• STM32 core version: [2.8.0]
• Tools menu settings if not the default: [No Serial]
• Upload method: [SWD]

Board (please complete the following information):
FQBN: STMicroelectronics:stm32:GenG0:pnum=GENERIC_G030C8TX,xserial=disabled

[fpistm]

Hi @sunnyguhz
What is the version of STM32CubeProgrammer?
Is the reset signal connected?