diff --git a/docs/getting-started/3-device-examples/2-compile-example-code/1-zephyr/02-zephyr-samples.md b/docs/getting-started/3-device-examples/2-compile-example-code/1-zephyr/02-zephyr-samples.md
index be05c679..eedd5f55 100644
--- a/docs/getting-started/3-device-examples/2-compile-example-code/1-zephyr/02-zephyr-samples.md
+++ b/docs/getting-started/3-device-examples/2-compile-example-code/1-zephyr/02-zephyr-samples.md
@@ -28,8 +28,6 @@ for a range of development boards as part of our continuous integration (CI).
   Kit](https://www.nxp.com/design/design-center/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1024-evaluation-kit:MIMXRT1024-EVK)
 * [ESP32 DevKitC
   WROVER](https://www.espressif.com/en/products/devkits/esp32-devkitc)
-* [RAK5010 WisTrio NB-IoT Tracker Pro (Quectel
-  BG95-M3)](https://docs.rakwireless.com/Product-Categories/WisTrio/RAK5010)
 
 This page includes build commands for these boards. You may model configuration
 for your own target hardware on the configuration and overlay files found in the
@@ -90,7 +88,6 @@ values={[
 {label: 'Nordic nRF52840', value: 'nrf52840'},
 {label: 'NXP FRDM-RW612', value: 'rw612'},
 {label: 'ESP32', value: 'esp32'},
-{label: 'RAK5010', value: 'rak5010'},
 ]}>
 
 <TabItem value="nrf52840">
@@ -116,25 +113,6 @@ west build -b esp32_devkitc_wrover/esp32/procpu examples/zephyr/hello
 west flash
 ```
 </TabItem>
-
-<TabItem value="rak5010">
-
-:::tip RAK5010 Requires an External Programmer
-
-You will need an external programmer to flash the RAK5010. There are many
-options, including J-Link, BlackMagic Probe, and using the offboard debug header
-on an nRF9160dk.
-
-For this example [we've connected a J-Link
-programmer](https://docs.rakwireless.com/Product-Categories/WisTrio/RAK5010/Quickstart/#through-j-link-rtt-viewer).
-
-:::
-
-```console
-west build -b rak5010 examples/zephyr/hello
-west flash -r jlink
-```
-</TabItem>
 </Tabs>
 
 ### Setting Credentials